East Penn Carrier & Wrecker Sales Inc
1100 Win Drive,Bethlehem PA, 18017
1100 Win Drive,Bethlehem PA, 18017
Copyright @ 2011
East Penn Carrier & Wrecker Sales Inc
7298 W Market St, Mercer PA 16137
7298 W Market St, Mercer PA 16137
________________________________________________________________________________________________
TRAVELING SPEED CHOCK
The Traveling Speed Chock from In The Ditch Helps prevents
vehicles from rolling off the deck of a car carrier during loading
and unloading. Chock travels up the deck with the vehicle and
will help prevent the vehicle from rolling off the deck should you
have a catastrophic failure of the winch or wire rope. People who
have used it, call it a Life Saver! Sold individually!
vehicles from rolling off the deck of a car carrier during loading
and unloading. Chock travels up the deck with the vehicle and
will help prevent the vehicle from rolling off the deck should you
have a catastrophic failure of the winch or wire rope. People who
have used it, call it a Life Saver! Sold individually!
- You can set the Chock up to work from Passenger or Driver Side
of the truck. Your Choice! - Light weight design is proven with over 2 years of field testing
by towers. - Easily adjust to fit most passenger vehicles.
- The Rubber Chock is Siped for better holding ability.
- Priced so you can afford one for every truck in your fleet.
- Limited 30 day money back guarantee.
ITD1260
To secure exotic and low-profile cars, Miller Industries introduced the
Miller Pro Pack Four-Wheel Tie-Down Kit. The kit includes straps that
pass through the rims, and is the preferred method of most towers
who haul high-end vehicles. This kit was designed specifically for
Miller Industries and includes four ratchet assemblies with chain
tails, four wheel straps and four fleece sleeve protectors with foam
padding and Velcro™ closures. A small duffel bag is also included
for protecting and storing the components when not in use. The
duffel and the straps are all embossed with the Miller Industries
logo. This kit provides a fast, safe and convenient way to provide a
four-point tie-down while still protecting the finish on expensive rims.
Miller Pro Pack Four-Wheel Tie-Down Kit. The kit includes straps that
pass through the rims, and is the preferred method of most towers
who haul high-end vehicles. This kit was designed specifically for
Miller Industries and includes four ratchet assemblies with chain
tails, four wheel straps and four fleece sleeve protectors with foam
padding and Velcro™ closures. A small duffel bag is also included
for protecting and storing the components when not in use. The
duffel and the straps are all embossed with the Miller Industries
logo. This kit provides a fast, safe and convenient way to provide a
four-point tie-down while still protecting the finish on expensive rims.
Four Wheel Tie Down Kit
MI-124008032
________________________________________________________________________________________________
Miller Industries recently debuted the new Miller Port-A-Ring, a
portable D-ring that quickly and easily fits into any key slot on
Century, Vulcan and Champion steel carrier beds. The Port-A-Ring’s
patent-pending design allows it to drop into the key slot hole and
slide securely into the slot, providing a D-ring rated at 6,500 pounds
that can be used with a snatch block for winching or aligning a
vehicle on the carrier bed or securing a load. The Port-A-Ring is
currently available for Century, Vulcan and Champion steel carriers
and will soon be available for other brands and models of carriers.
portable D-ring that quickly and easily fits into any key slot on
Century, Vulcan and Champion steel carrier beds. The Port-A-Ring’s
patent-pending design allows it to drop into the key slot hole and
slide securely into the slot, providing a D-ring rated at 6,500 pounds
that can be used with a snatch block for winching or aligning a
vehicle on the carrier bed or securing a load. The Port-A-Ring is
currently available for Century, Vulcan and Champion steel carriers
and will soon be available for other brands and models of carriers.
Port-A-Ring
MI-0809730-1
________________________________________________________________________________________________
Miller Industries is offering a new dolly bracket specifically
designed to be used with the VULCAN® 806 & 807, 810 Intruder®,
Century® Midnight Express® and Express series.
The bracket mounts on the rear tailgate section next to the wheel lift
boom allowing for better rear visibility and freeing up the upper deck
area for mounting additional equipment such as fuel cans or air
tanks. The swing arm is released by a camlock that allows the
dollies to swing past the side or tail section for better access and
the lower mounting height making them easier to lift on and off. The
bracket is lockable and designed to be used with the popular
In-The-Ditch self-loading dollies. Sold in pairs!
designed to be used with the VULCAN® 806 & 807, 810 Intruder®,
Century® Midnight Express® and Express series.
The bracket mounts on the rear tailgate section next to the wheel lift
boom allowing for better rear visibility and freeing up the upper deck
area for mounting additional equipment such as fuel cans or air
tanks. The swing arm is released by a camlock that allows the
dollies to swing past the side or tail section for better access and
the lower mounting height making them easier to lift on and off. The
bracket is lockable and designed to be used with the popular
In-The-Ditch self-loading dollies. Sold in pairs!
Swing Arm Dolly Bracket
MI-124004274
