Series 20 Four Car Carrier

Click here for Optional  Available Equipment
 

Exclusive optional Features of East Penn Carriers

• Deck Length up to 30 ft
• 20,000 Ib Deck Rating 
• 4,000 Ib Wheel lift Extended
• Wide Choose of Winches Available
• Dual Illuminated Rear Controls
• Full Steel Cab Protector with Aluminum Trim
• Front Left and Right Safety Chains and Trays
• Raised Aluminum or Steel Sides
• 3/16" Flooring
• 3/8" x 50' Heavy Duty Cable
• Back Up Alarm
• Choice of 3 Wheel lift Styles
• PTO-Cable, Air or Electric
• (4) Halogen Work Lights
• Factory Installed

• (2) Long J-Hooks - Rear
• Front Hook-Up Chain of Choice
• Code 3 or Federal Bar Light with Rear Work Lights and S.T.T.
• 49" Aluminum Tool Box

• Mechanical Anti Tilt
• D.O.T. Kit
• Log Book
• Roadside Reflector Kit
• Fire Extinguisher
• Work Gloves
• Reflective Mud Flaps
• Magnetic Tow Lights
• Phoenix Stainless Steel Wheel Simulators
• F.O.B. Bethlehem, PA

Series 20 -4 Car Standard Equipment

•  Aluminum Body:
  -High tensile 4" double-box extruded floor system
  -Heavy duty extruded sill with integral full length    graphite-impregnated wear strips top and bottom
  -Front left and right chain trays
  -9" extruded double-box sides
  -Front and Rear sill reinforcements
  -Heavy duty approach plate
  -6 Chain locks
  -Smooth Floor

•  Steel Body
  -3/16" smooth floor
  -4" x 2" structural tube cross members 12 inches on center
  -Raised reinforced steel side rails
  -6 Chain locks
  -Full length body slide pads  

• Full length reinforced rail sub frame
• Body lock
• Illuminated dual controls
• Fully hydraulic hitch or wheel lift
• Mud flaps
• Federal standard 108 shock mounted lighting
• Tow light plug
• Cable roller guide/tensioner (8,000lb winch only)
• Winch free wheel extension (8,000 lb winch only)

• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points
• 8,000 lb hydraulic winch with 3/8 x 50 ft cable
• Pilot operated holding valves on tilting and lifting functions
• Mechanical anti-lift
• Backup alarm
• Releasable L-arms
• Safety chains

Series 20 - Four Car Specifications

• Steel Body width  - 92 I.D. x 98 O.D. or optional 102" wide
• Aluminum Body Width - 92 I.D. x 96-3/4 O.D. or optional 102" wide
• Body Extension - 117 inches
• Hitch reach - 41 inches
• Wheel lift reach - 64 inches
• Control Valve - Sectional, 20 GPM, 1700 PSI
• Oil reservoir - 12 gallons

• Oil filter - 250 PSI, 10 Microns
• Pump - 18 or 28 GPM
• Winch - Wide Variety Available
• Body Rating - 20,000 evenly distributed
• Hitch Rating - 3,500 lbs. extended
• Wheel Lift Rating - 4,000 lbs extended
• Cab Carrier rating - 5,000 lbs. evenly distributed

Series 20 - Four Car Steel Carrier Specifications

Body Construction

• Sills- 7x3-1/4x1/4 formed reinforced channels
  
• Cross members- 4x2 tube- 12 inches on center ,   5x2 tube standard on wood floor- 12 inches on center
  
• Steel Floor- Standard-3/16 smooth,  Optional-3/16 deck plate, Optional-1/4smooth plate, Optional-1/4 deck plate
   

Winch

• Standard equipment- 8,000 lb. Ramsey worm gear with 3/8 x 50 ft cable
  
• Optional- 9,000lb. Low mount Planetary with 3/8 x 50 ft cable
  
• Optional- Wire remote control for winch
   

Hydraulics

• Valves-20 GPM, 1700 PSI
  
• Tilt cylinders- 4 inch bore, 2 inch chrome rod
  
• Wheel lift up and down- 4000lb. – 3-1/2 inch bore, 1-1/2 chrome rod
   

Ratings

• Body- 20,000lbs. evenly distributed
  Wheel lift- 4000 lbs. extended
• Cab Carrier- 5000lbs. evenly distributed
   

Series 20 - Four Car Aluminum Carrier Specifications

Body Construction

• Sills- Channel extrusion with integral full length wear strips top and bottom
  
• Sides- Standard equipment 9x2-1/4 double hollow tube , optional open rail 2x2 and 5x2- tubes welded into a truss
• Floor- 4 inch thick double box interlocking extrusions with cross members
   

Subframe

• Rails- 6x3x1/4 structural tube reinforced with 5x2x1/4 structural tube
  
• Controls- dual illuminated
   

Hydraulics

• Valves- 20 GPM, 1700 PSI
  
• Tilt Cylinders- 4 inch bore, 2 inch chrome rod
  
• Slide back Cylinder- 4-1/2 inch bore, 2 inch chrome rod
  
• Wheel lift up-down – 4000lb- 3-1/2 inch bore, 1-1/2 chrome rod
   

Ratings

• Body-20,000 lbs. evenly distributed
  
• Wheel lift- 4,000 lbs. extended
• Cab Carrier- 5,000 evenly distributed
   

Get a quote on this truck!