Chevron Renegade II (Modular) Steel Body

  • Chevron Renegade

Features of East Penn Built Wreckers

9,000lb Warn High output planetary winch single or dual line 10,000lb tow capacity
8 ton recovery boom retracted Optional stainless steel body sides
Dual rear controls Wired inside remote controls
Premium federal signal or code 3 light bar Power tilt on wheel lift with negative tilt capability
Safety chain pockets w/ grade 70 chains Tow light plug receptable
Magnetic tow lights Deluxe light bar pylon w/ aluminum diamond plate
(4) Halogen work lights 8" structural C channel sills
Phoenix stainless steel simulators FMVSS 108 tail lamp group
Back up alarm Roadside reflector kit
Fire extinguisher Work gloves
Wheel lift straps Dash mount power up switch panel
Releasable L-arms Junction box with wire harness

Optional Equipment

Aluminum modular lighted body Stainless steel body slides
24" Alum lighted tunnel toolbox PTO
24" Steel lighted tunnel toolbox Clutch pump
Slanted steel pylon Autogrip II
Steel perimeter tube pylon Pivoting L-arms
Aluminum pylon (Alum body only) Radio remote control
In cab electric remore controls  

Accessories

Bar lights Push bumper
Work lights Trailer hitch adaptor for AutoGrip II
Switch panel Tow bar adaptors for AutoGrip II
Magnetic tow lights Motorcycle adaptors for AutoGrip II
3 inch frame forks (STD cross bar) Pintle hitch adaptor (STD crossbar)
J-hook chains Tow sling

Specifications

  • CA - 60 or 84"
  • Minimum GVWR - 11,000lbs
  • Maximum GVWR - 22,000lns
  • Maximum frame height - 37 Inches
  • Minimum frame RBM - 280,000 in lbs
  • Boom elevation - 31 Degrees
  • Boom extension - 63 Inches
  • Under lift reach - 70 Inches
  • Power tilt range - (+/-) 10 Degrees
  • Control valve - Sectional, 12 GPM, 1700PSI
  • Control valve under lift - Sectional 12 GPM 1700 PSI
  • Oil reservoir steel body- 10 Gallons
  • Oil reservoir aluminum body - 13 Gallons
  • Oil filter - 250 PSI, 15 GPM 10 Microns
  • Pump - 6-15 GPM at 1000 RPM